Brief Views JHA700-E104FW series is JHA’s for broadband access market based on the introduction of EPON technology passive optical network terminal products. It’s with EPON OLT are used together to provide a complete broadband access solution. EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements. JHA700-E104 series fully meet IEE802.3ah and CTC3.0 standard protocol. It has good third-party compatibility to work with the third party OLT, It supports 1Gbps transmission rate up and down and provides users with good QOS, flexible bandwidth allocation of Ethernet services and IP integrated service. JHA700-E104 series can integration wireless function with meet 802.11 n/b/g technical standards, It has built-in high gain directional antenna, the wireless transmission rate up to 300Mbps. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security. Functional Feature ♦ Support port-based rate limitation and bandwidth control; ♦ In compliant with IEEE802.3ah Standard ♦ Wi-Fi series meet 802.11 n/b/g technical standards ♦ Up to 20KM transmission Distance ♦ Support data encryption, group broadcasting, port Vlan separation ,etc. ♦ Support Dynamic Bandwidth Allocation (DBA) ♦ Support ONU auto-discovery/Link detection/remote upgrade of software; ♦ Support port mode of VLAN configuration ♦ Support power-off alarm function ,easy for link problem detection ♦ Support broadcasting storm resistance function ♦ Support port isolation between different ports ♦ Support port flow control ♦ Support ACL to configure data packet filter flexibly ♦ Specialized design for system breakdown prevention to maintain stable system ♦ Support software online upgrading ♦ EMS network management based on SNMP ,convenient for maintenance Product interface and LED definitions Indicator Description 1 PWR Power status On: The ONU is power on; Off: The ONU is Power off; 2 PON ONU Register On: Success to register to OLT Blinking: In process of registering to OLT; Off: In process of registering to OLT; 3 LOS EPON optical signals On: Optical power lower than receiver sensitivity ; Off: Optical in normal 4 LAN1-4 LAN Port status On: Ethernet connection is normal; Blinking: Data is being transmitted through the Ethernet port; Off: Ethernet connection is not set up; 5 WIFI WIFI Blinking：Data is being transmitted On：Wi-Fi function Open Off：Wi-Fi function Close Specification Item Parameter PON Interface 1 EPON optical interface Meet 1000BASE-PX20+ standard Symmetric 1.25Gbps upstream/downstream SC/UPC single-mode fiber split ratio: 1:64 Transmission distance 20KM User Ethernet Interface 4*10/100M or 3*10/100M and 1*10/100/1000M or4*10/100/1000M auto-negotiationFull/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance Power Interface An external 12V DC 0.5A power supply adapter PONOpticalParameter Wavelength: Tx 1310nm, Rx1490nm Tx Optical Power: 0～4dBm Rx Sensitivity: -27dBm Saturation Optical Power: -3dBm Data Transmission Parameter PON Throughput: Downstream 980Mbps; Upstream 950Mbps Ethernet: 100Mbps or 1000Mbps Packet Loss Ratio: <1*10E-12 latency: <1.5ms Business Capability Layer 2 wire speed switchingSupport VLAN TAG/UNTAG，VLAN translationSupport Port-based speed limitationSupport Priority classification Support storm control of broadcast Support loop detection Network Management Support IEEE802.3 QAM, ONU can be remotely managed by OLTSupport Remote management through SNMP and TelnetLocal management Management Function Status monitor, Configuration management, Alarm management, Log management Shell Plastic casing Power 4FE+WIFI: <6.5W, 12V/0.6A power supply adapter3FE+1GE+WIFI <6.5W, 12V/0.6A power supply adapter4GE+WIFI: <7.5W, 12V/1A power supply adapter Physical Specifications Item Dimension：160mm(L) x 120mm(W) x 32.5mm (H)Item weight：0.2kg Environmental Specifications Operating temperature: 0 to 50℃ Storage temperature: -40 to 85℃ Operating humidity: 10% to 90%(Non-condensing) Storage humidity: 10% to 90%(Non-condensing) WIFI Specification Item Parameter Performance parameters Operating Mode Router or bridge Antenna gain 2*5dBi Throughput IEEE 802.11b: 11MbpsIEEE 802.11g: 54 MbpsIEEE 802.11n: 300Mbps Frequency 2.412 ~ 2.472 GHz Channel 13*Channel, configurable to meet the standard of USA, Canada, Japan and China Modulation DSSS , CCK and OFDM Coding BPSK, QPSK, 16QAM and 64QAM RF receive sensitivity 802.11b:-83dBm @ 1 Mbps; -80dBm @ 2 Mbps; -79dBm @ 5.5 Mbps; -76dBm @ 11 Mbps802.11g: -85dBm @ 6 Mbps; -84dBm @ 9 Mbps; -82dBm @ 12 Mbps; -80dBm @ 18 Mbps; -77dBm @ 24 Mbps; -73dBm @ 36 Mbps; -69dBm @ 48 Mbps; -68dBm @ 54 Mbps 802.11n 20MHz: -74dBm @ 65 Mbps; -70dBm @ 130 Mbps; 802.11n 40MHz: -70dBm @ 135 Mbps; -67dBm @ 300 Mbps; RF output lever 802.11b:17 ±0.5dBm @11Mbps 802.11g:15 ±0.5dBm @ 54 Mbps; 16 ±0.5dBm @ 48 Mbps; 17 ± 1dBm @ 6 ~ 36 Mbps 802.11n 20MHz: 14 ± 0.5dBm @ 130 Mbps; 15 ± 0.5dBm @ 78 Mbps; 18 ± 0.5dBm @ 6.5 Mbps 802.11n 40MHz: 14 ± 0.5dBm @ 300 Mbps; 15 ± 0.5dBm @ 162 Mbps; 18 ± 0.5dBm @ 13.5 Mbps Encryption Mode 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK) Network application Typical Solution:FTTH, FTTO Typical Business:INTERNET, WIFI Figure: JHA700-E104 (includes wifi) series Application Diagram Ordering Information Product Name Product Model Descriptions 4FE+WIFI JHA700-E104FW-HR220 4*10/100M Ethernet interface, support Wi-Fi function, 1 EPON interface, plastic casing, external power supply adapter 3FE+1GE+WIFI JHA700-E104XW-HR220 3*10/100M and 1*10/100/1000M Ethernet interface, support Wi-Fi function, 1 EPON interface, plastic casing, external power supply adapter 4GE+WIFI JHA700-E104GW-HR220 4*10/100/1000M Ethernet interface, support Wi-Fi function, 1 EPON interface, plastic casing, external power supply adapter