Introduction JHA-G11 series is a dual fiber media converter complies with IEEE802.3 standards, It is designed to convert data signal between 1000Base-FX and 10/100/1000Base-T(X) Ethernet. The media converter is connected between fiber cable and twisted cable, extend your Ethernet network beyond the 100-meter limit imposed by copper cable. This converter model can be used as slide-in module to the 14-slot 19" Rack-Mount Chassis. Converter is transparent to all protocols, can be used all all areas as Fiber to The Home, Fiber to the Business or Fiber to The Curb. Features • Compliance with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1Q, 10Base-TX, 100Base-TX, 1000Base-TX, 1000Base-FX standards. • It supports TCP / IP, PPPOE, DHCP, ICMP, NAT protocol. • Flow control: Full duplex using IEEE 802.3X, a standard half-duplex adopt Backpressure. • Electrical ports support auto-negotiation function, automatically adjusts the transmission and transfer rates. • Ports support Auto-MDI / MDIX auto-flip. • Support store and forward mode. • Supports 10M, 100M, 1000M mode or adaptive mode. • Provide status indicators, external power supply (output 5V ~ 50HZ 2A). • The card design, to facilitate future maintenance and inspection equipment. • Modular power supply design, function board with separate power supply design, easy to post-maintenance. • Unique IC solutions, the chip temperature low, to get rid of plus cooling system, flow control and reduce broadcast storms. • High-quality integrated photovoltaic module provides good optical properties and electrical properties to ensure reliable transmission, long life. • Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward. • It supports up to 1916 byte long data packet transmission. • Missing link to provide remote diagnostics, electrical interface and optical port link link connection diagnostics, dynamic data transmission, full-duplex / half duplex, speed light, easy installation and later maintenance. • Ultra-low power consumption of less than 2.5W (Input: AC140 ~ 260V), low heat, stable operation for a long time. Dimension Specification Protocol Standard IEEE802.3, IEEE802.3u, IEEE802.3x Flow control, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/1550nm Transmission Distance Cat5 100mMultimode, Dual-fiber 550m Single Mode, Dual-fiber 20/40/60/80/100/120Km Ethernet Port RJ45 Ports, Connection STP / UTP Cat5/Cat5e Cooper Cable Fiber Port Multimode, Dual-fiber SC/ST/FC (Diameter 50/125, 62.5 / 125μm)Single Mode, Dual-fiber SC/FC (diameter 9/125μm ) Exchange Attribute Conversion Method: Media conversion, store and forward / straight inMAC Add: 1 K Cache: 1 Mbit Full duplex state: flow control, half-duplex: backpressure mode Store and Forward: 9.6us, Straight In: 0.9us BER: <1/1000000000 LED Indicator PWR( Power Supply )FX LINK/ACT FDX ( Ethernet port full / half duplex mode ) TX LINK/ACT ( Ethernet port communication / action ) 1000 ( 1000/100/10M transmission rate ) FX ( Optical signal ) Power Supply Power Input: DC5V2AFull Load: <2.5 W Working Environment Operating Temperature: -20~70℃Storage Temperature: -40~70℃ Storage Humidity: 5% to 90% non-condensing Dimension 94*71*26mm ( L * W * H ) Certification CE, FCC, RoHS Warranty 3-years Order Information Model No. Description of Goods JHA-G11 10/100/1000M Multimode, Dual Fiber, 550m, SC/ST/FC Connector JHA-G11-20 10/100/1000M Single-mode, Dual Fiber, 20Km, SC/ST/FC Connector JHA-G11-40 10/100/1000M Single-mode, Dual Fiber, 40Km, SC/ST/FC Connector JHA-G11-60 10/100/1000M Single-mode, Dual Fiber, 60Km, SC/ST/FC Connector JHA-G11-80 10/100/1000M Single-mode, Dual Fiber, 80Km, SC/ST/FC Connector JHA-G11-100 10/100/1000M Single-mode, Dual Fiber, 100Km, SC/ST/FC Connector